PetaVision  Alpha
 All Data Structures Namespaces Functions Variables
PV::KernelProbe Class Reference
Inheritance diagram for PV::KernelProbe:
PV::BaseHyPerConnProbe PV::BaseConnectionProbe PV::BaseProbe PV::BaseObject PV::L2ConnProbe

BaseProbe Parameters

List of parameters for the BaseProbe class

virtual void ioParam_message (enum ParamsIOFlag ioFlag)
 message: A string parameter that is typically included in the lines output by the outputState method
virtual void ioParam_textOutputFlag (enum ParamsIOFlag ioFlag)
 textOutputFlag: A boolean parameter that sets whether to generate an output file. Defaults to true.
virtual void ioParam_probeOutputFile (enum ParamsIOFlag ioFlag)
 probeOutputFile: If textOutputFlag is true, probeOutputFile specifies the name of the file that the outputState method writes to. If blank, the output is sent to the output stream.
virtual void ioParam_triggerFlag (enum ParamsIOFlag ioFlag)
 triggerFlag: If false, the needUpdate method always returns true, so that outputState is called every timestep. If true, the needUpdate method uses triggerLayerName and triggerOffset to determine if the probe should be triggered.
virtual void ioParam_triggerLayerName (enum ParamsIOFlag ioFlag)
 triggerLayerName: If triggerFlag is true, triggerLayerName specifies the layer to check for triggering.
virtual void ioParam_triggerOffset (enum ParamsIOFlag ioFlag)
 triggerOffset: If triggerFlag is true, triggerOffset specifies the time interval before the triggerLayer's nextUpdate time that needUpdate() returns true.
virtual void ioParam_energyProbe (enum ParamsIOFlag ioFlag)
 energyProbe: If nonblank, specifies the name of a ColumnEnergyProbe that this probe contributes an energy term to.
virtual void ioParam_coefficient (enum ParamsIOFlag ioFlag)
 coefficient: If energyProbe is set, the coefficient parameter specifies that ColumnEnergyProbe multiplies the result of this probe's getValues() method by coefficient when computing the error. More...

Public Member Functions

 KernelProbe (const char *probename, HyPerCol *hc)
virtual int allocateDataStructures ()
virtual int communicateInitInfo ()
double getCoefficient ()
char const * getEnergyProbe ()
char const * getKeyword () const
char const * getName () const
int getNumValues ()
HyPerColgetParent () const
BaseConnectiongetTargetConn ()
HyPerConngetTargetHyPerConn ()
const char * getTargetName ()
double getValue (double timevalue, int index)
int getValues (double timevalue, double *valuesVector)
int getValues (double timevalue, std::vector< double > *valuesVector)
int ioParams (enum ParamsIOFlag ioFlag)
virtual bool needUpdate (double time, double dt)
virtual int outputState (double timef)
virtual int outputStateWrapper (double timef, double dt)
virtual int writeTimer (std::ostream &stream)

Protected Member Functions

virtual int calcValues (double timevalue)
int getArbor ()
int getKernelIndex ()
double getLastUpdateTime ()
const char * getMessage ()
bool getOutputPatchIndices ()
bool getOutputPlasticIncr ()
OutStreamgetOutputStream ()
bool getOutputWeights ()
bool getTextOutputFlag () const
int getValues (double timevalue)
double * getValuesBuffer ()
int initialize (const char *probename, HyPerCol *hc)
virtual int initMessage (const char *msg)
virtual int initNumValues ()
virtual int initOutputStream (const char *filename)
virtual void ioParam_arborId (enum ParamsIOFlag ioFlag)
virtual void ioParam_kernelIndex (enum ParamsIOFlag ioFlag)
virtual void ioParam_outputPatchIndices (enum ParamsIOFlag ioFlag)
virtual void ioParam_outputPlasticIncr (enum ParamsIOFlag ioFlag)
virtual void ioParam_outputWeights (enum ParamsIOFlag ioFlag)
virtual void ioParam_targetName (enum ParamsIOFlag ioFlag)
 targetName: the name of the object that the probe attaches to. In LayerProbe, targetName is used to define the targetLayer, and in BaseConnectionProbe, targetName is used to define the targetConn.
virtual int ioParamsFillGroup (enum ParamsIOFlag ioFlag)
bool isWritingToFile () const
virtual bool needRecalc (double timevalue)
std::ostream & output ()
int patchIndices (HyPerConn *conn)
virtual double referenceUpdateTime () const
int setName (char const *name)
int setNumValues (int n)
int setParent (HyPerCol *hc)

Protected Attributes

double coefficient
char * energyProbe
char * name
char * targetName
bool triggerFlag
char * triggerLayerName
double triggerOffset

Private Member Functions

int initialize_base ()

Private Attributes

int arborID
int kernelIndex
bool outputPatchIndices
bool outputPlasticIncr
bool outputWeights

Detailed Description

Definition at line 15 of file KernelProbe.hpp.

Member Function Documentation

int PV::KernelProbe::allocateDataStructures ( )

Called during HyPerCol::run, during the allocateDataStructures stage. BaseProbe::allocateDataStructures sets up the output stream. Derived classes that override this method should make sure to call this method in their own allocateDataStructures methods.

Reimplemented from PV::BaseProbe.

Definition at line 86 of file KernelProbe.cpp.

virtual int PV::KernelProbe::calcValues ( double  timevalue)

A pure virtual method to calculate the values of the probe. calcValues() can assume that needRecalc() has been called and returned true. It should write the computed values into the buffer of member variable 'probeValues'.

Implements PV::BaseProbe.

Definition at line 37 of file KernelProbe.hpp.

int PV::KernelProbe::communicateInitInfo ( )

A pure virtual function called during HyPerCol::run, during the communicateInitInfo stage. BaseProbe::communicateInitInfo sets up the triggering layer and attaches to the energy probe, if either triggerFlag or energyProbe are set.

Reimplemented from PV::BaseHyPerConnProbe.

Definition at line 70 of file KernelProbe.cpp.

double PV::BaseProbe::getCoefficient ( )

Returns the coefficient if the energy probe is set.

Definition at line 101 of file BaseProbe.hpp.

char const* PV::BaseProbe::getEnergyProbe ( )

Returns the name of the energy probe the probe is attached to (null if not attached to an energy probe)

Definition at line 96 of file BaseProbe.hpp.

double PV::BaseProbe::getLastUpdateTime ( )

Returns the time that calcValues was last called. BaseProbe updates the last update time in getValues() and getValue(), based on the result of needRecalc.

Definition at line 289 of file BaseProbe.hpp.

const char* PV::BaseProbe::getMessage ( )

Returns a pointer to the message parameter.

Definition at line 244 of file BaseProbe.hpp.

int PV::BaseProbe::getNumValues ( )

Returns the number of value indices the probe can compute (typically the value of the parent HyPerCol's nBatch parameter). BaseProbe::getNumValues() returns the parent HyPerCol's getNBatch(), which can be overridden. Probes derived from BaseProbe can set numValues to zero or a negative number to indicate that getValues() and getNumValues() are not fully implemented for that probe.

Definition at line 71 of file BaseProbe.hpp.

OutStream* PV::BaseProbe::getOutputStream ( )

Returns a pointer to the OutStream used by outputState.

Definition at line 255 of file BaseProbe.hpp.

const char* PV::BaseProbe::getTargetName ( )

Returns the name of the targetName parameter for this probe. LayerProbe uses targetName to specify the layer to attach to; BaseConnectionProbe uses it to specify the connection to attach to.

Definition at line 91 of file BaseProbe.hpp.

bool PV::BaseProbe::getTextOutputFlag ( ) const

Returns the value of the textOutputFlag parameter

Definition at line 294 of file BaseProbe.hpp.

double PV::BaseProbe::getValue ( double  timevalue,
int  index 

getValue() is meant for situations where the caller needs one value that would be returned by getValues(), not the whole buffer. getValue() returns a signaling NaN if index is out of bounds. If index is valid, getValue() calls calcValues() if needRecalc() returns true, and then returns probeValues[index]. Derived classes should not override or hide this method. Instead, they should override calcValues.

Definition at line 343 of file BaseProbe.cpp.

int PV::BaseProbe::getValues ( double  timevalue,
double *  valuesVector 

getValues(double timevalue, double * values) sets the buffer 'values' with the probe's calculated values. It assumes that the values buffer is large enough to hold getNumValues() double-precision values. If 'values' is NULL, the values are still updated internally if needed, but those values are not returned. Internally, getValues() calls calcValues() if needRecalc() is true. It then copies the probeValues buffer to the input argument buffer 'values'. Derived classes should not override or hide this method. Instead, they should override calcValues.

Definition at line 330 of file BaseProbe.cpp.

int PV::BaseProbe::getValues ( double  timevalue,
std::vector< double > *  valuesVector 

getValues(double timevalue, vector<double> * valuesVector) is a wrapper around getValues(double, double *) that uses C++ vectors. It resizes valuesVector to size getNumValues() and then fills the vector with the values returned by getValues.

Definition at line 338 of file BaseProbe.cpp.

int PV::BaseProbe::getValues ( double  timevalue)

If needRecalc() returns true, getValues(double) updates the probeValues buffer (by calling calcValues) and sets lastUpdateTime to the timevalue input argument.

Definition at line 319 of file BaseProbe.cpp.

double* PV::BaseProbe::getValuesBuffer ( )

Returns a pointer to the buffer containing the probeValues.

Definition at line 282 of file BaseProbe.hpp.

int PV::BaseProbe::initMessage ( const char *  msg)

The method called by BaseProbe::initialize() to set the message used by the probe's outputState method.

Definition at line 264 of file BaseProbe.cpp.

int PV::KernelProbe::initNumValues ( )

initNumValues is called by initialize. BaseProbe::initNumValues sets numValues to the parent HyPerCol's getNBatch(). Derived classes can override initNumValues to initialize numValues to a different value.

Reimplemented from PV::BaseProbe.

Definition at line 66 of file KernelProbe.cpp.

void PV::BaseProbe::ioParam_coefficient ( enum ParamsIOFlag  ioFlag)

coefficient: If energyProbe is set, the coefficient parameter specifies that ColumnEnergyProbe multiplies the result of this probe's getValues() method by coefficient when computing the error.

Note that coefficient does not affect the value returned by the getValue() or getValues() method.

Reimplemented in PV::FirmThresholdCostFnLCAProbe, PV::L0NormLCAProbe, and PV::L1NormLCAProbe.

Definition at line 107 of file BaseProbe.cpp.

bool PV::BaseProbe::isWritingToFile ( ) const

Returns true if a probeOutputFile is being used. Otherwise, returns false (indicating output is going to getOutputStream().

Definition at line 300 of file BaseProbe.hpp.

bool PV::BaseHyPerConnProbe::needRecalc ( double  timevalue)

A pure virtual method for that should return true if the quantities being measured by the probe have changed since the last time the quantities were calculated. Typically, an implementation of needRecalc() will check the lastUpdateTime of the object being probed, and return true if that value is greater than the lastUpdateTime member variable. needRecalc() is called by getValues(double) (and hence by getValue() and the other flavors of getValues). Note that there is a single needRecalc that applies to all getNumValues() quantities.

Implements PV::BaseProbe.

Definition at line 44 of file BaseHyPerConnProbe.cpp.

bool PV::BaseProbe::needUpdate ( double  time,
double  dt 

If there is a triggering layer, needUpdate returns true when the triggering layer's nextUpdateTime, modified by the probe's triggerOffset parameter, occurs; otherwise false. If there is not a triggering layer, needUpdate always returns true. This behavior can be overridden if a probe uses some criterion other than triggering to choose when output its state.

Definition at line 291 of file BaseProbe.cpp.

std::ostream& PV::BaseProbe::output ( )

Returns a reference to the ostream that outputState writes to.

Definition at line 260 of file BaseProbe.hpp.

int PV::KernelProbe::outputState ( double  timef)

A pure virtual method for writing output to the output file.

Implements PV::BaseProbe.

Reimplemented in PV::L2ConnProbe.

Definition at line 106 of file KernelProbe.cpp.

int PV::BaseProbe::outputStateWrapper ( double  timef,
double  dt 

The public interface for calling the outputState method. BaseConnection::outputStateWrapper calls outputState() if needUpdate() returns true. This behavior is intended to be general, but the method can be overridden if needed.

Definition at line 357 of file BaseProbe.cpp.

double PV::BaseHyPerConnProbe::referenceUpdateTime ( ) const

Implements the referenceUpdateTime method. Returns the last update time of the target HyPerConn.

Implements PV::BaseProbe.

Definition at line 48 of file BaseHyPerConnProbe.cpp.

int PV::BaseProbe::setNumValues ( int  n)

Sets the numValues member variable (returned by getNumValues()) and reallocates the probeValues member variable to hold numValues double-precision values. If the reallocation fails, the probeValues buffer is left unchanged, errno is set (by a realloc() call), and PV_FAILURE is returned. Otherwise, PV_SUCCESS is returned.

Definition at line 201 of file BaseProbe.cpp.

The documentation for this class was generated from the following files: